Sekonic SPECTROMASTER C-800 - Page 89

77
4. Basic Operations
NOTE
CC index number is to compensate the difference from the black body
radiation.
⊿
CC index number is the difference between standard light source
and other light sources instead of difference from the black body
radiation.
CC lter number is the CC correction value from black body radiation in
total value of CC lter number.
⊿
CC lter number is the CC correction value in camera lter name
from the reference light source CC lter number to measured light
source CC lter number. This is useful when the light source selected
as standard cannot be ltered to correct (such as uorescent lamp on
the ceiling), and need to match all other light sources to the standard
light source in CC lter.
LB lighting lter is the LB correction value in the lighting lter name
from the set color temperature (black body).
CC camera lter is the CC correction value in CC camera lter name
from black body radiation.
⊿
LB lighting lter is the LB correction value in LB lighting lter name
from the reference light source LB lter number to measured light
source LB lter number. This is useful when the light source selected
as standard cannot be ltered to correct (such as uorescent lamp on
the ceiling), and need to match all other light sources to the standard
light source in CC lter.
⊿
CC lighting lter is the CC correction value in CC lighting lter name
from the reference light source CC lter number to measured light
source CC lter number. This is useful when the light source selected
as standard cannot be ltered to correct (such as uorescent lamp on
the ceiling), and need t o match all other light sources to the standard light
source in CC lter.
6.
Touch the [Close] button.
The message "Set the measured value. Are you sure?" will be displayed.
[No] Button
[Yes] Button
Message Conrmation Screen