To Next PageTo Next PageWhat to do if there is a rattling in the light receptor of Sekonic Measuring Instruments?
Small rattling is normal and necessary for switching. However, excessive rattling or abnormalities in rotating the light selection ring may indicate a fault. Contact your local retailer or Sekonic.
General| Type | Spectrometer |
|---|---|
| Color Temperature Range | 1, 600 to 40, 000 K |
| Spectral Wavelength Range | 380 to 780 nm |
| Power Source | Rechargeable lithium-ion battery |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Display | Color LCD |
| Measurement Range | 1 to 200, 000 lx |
| Spectral Response | Human eye response |
| Connectivity | USB |
| Weight | 350 g (including battery) |
| Memory Capacity | Up to 1, 000 measurements |
Product may expose you to chemicals known to cause cancer or birth defects.
Procedure for turning the meter on and off.
Outlines fundamental workflow and selecting measurement types.
Explains how to choose different data visualization modes on the screen.
Explains how to balance color temperatures of different light sources.
How to measure continuous light sources like sunlight or LED.
Procedures for measuring flash light wirelessly or via sync cord.
Storing, recalling, renaming, and deleting measurement data.
Procedure for performing dark calibration to ensure measurement accuracy.
Calibrates the touch panel for accurate input.
Resets all meter settings and data to factory defaults.
Provides solutions for common problems encountered with the meter.
