SEW-Eurodrive MOVIDRIVE MDA90A-0160-503-X-S00

10
Appendix
Declarations of conformity
Operating Instructions – MOVIDRIVE
®
modular
269
EU Declaration of Conformity
Translation of the original text 900990216/EN
SEW-EURODRIVE GmbH & Co. KG
Ernst-Blickle-Straße 42, D-76646 Bruchsal
declares under sole responsibility that the following products
Bruchsal
a) Authorized representative for issuing this declaration on behalf of the manufacturer
b) Authorized representative for compiling the technical documents
Place Date
10.11.2017
Managing Director Technology
Johann Soder
a) b)
MOVIDRIVE
®
modular MDA single-axis module
MDA90A-0020-503-X-S00
MDA90A-0040-503-X-S00
MDA90A-0080-503-X-S00
MDA90A-0120-503-X-S00
MDA90A-0160-503-X-S00
MDA90A-0240-503-X-S00
MDA90A-0320-503-X-S00
MDA90A-0480-503-X-S00
MDA90A-0640-503-X-S00/01
MDA90A-1000-503-X-S00
MDD double-axis module
MDD90A-0020-503-X-S00/X
MDD90A-0040-503-X-S00/X
MDD90A-0020-503-X-S00
MDD90A-0040-503-X-S00
MDD90A-0080-503-X-S00
in accordance with
Machinery Directive 2006/42/EC
(L 157, 09.06.2006, 24-86)
This includes the fulfillment of the protection targets for "electrical power supply" in accordance with annex I No. 1.5.1
according to the Low Voltage Directive 73/23/EEC -- Note: 2006/95/EC (until 19 Apr 2016) and 2014/35/EU (as of 20 Apr
2016) are currently valid.
EMC Directive 2014/30/EU 4)
(L 96, March 29, 2014, 79-106)
RoHS Directive 2011/65/EU
(L 174, July 1, 2011, 88-110)
Applied harmonized standards: EN ISO 13849-1:2008/AC:2009
EN 60204-1:2006+A1:2009+AC:2010
EN 61800-5-1:2007
EN 61800-5-2:2007
EN61800-3:2004/A1:2012
EN 50581:2012
4) According to the EMC Directive, the listed products are not independently operable products. EMC assessment is only possible
after these products have been integrated in an overall system. For the assessment, the product was installed in a typical plant
configuration.
24748536/EN – 11/2017