4
Installation
Control cabinet installation
Operating Instructions – MOVIDRIVE
®
modular
65
4.5.2 Installing a module
The retaining screws [1] and [2] are screwed into the prepared mounting grid in the
control cabinet but not tightened.
1. Place the module with the slotted holes on the unit base plate onto the retaining
screws [1] from the top.
2.
1.
[1]
[2]
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
20806979851
2. Push the module backwards to insert the retaining screws [2] into the upper holes
in the unit base plate.
3. Lower the module.
4. Tighten the retaining screws [1] and [2].
24748536/EN – 11/2017
To Next Page
Loading...