SEW-Eurodrive MOVIDRIVE MDA90A-0160-503-X-S00

4
Installation
Electrical installation
Operating Instructions – MOVIDRIVE
®
modular
89
4.6.16 System bus EtherCAT
®
/SBus
PLUS
For connecting the EtherCAT
®
/SBus
PLUS
system bus, SEW‑EURODRIVE recommends
to use only prefabricated cables from SEW‑EURODRIVE.
X30 IN
X30 OUT
X30 OUT
X30 IN
[2]
[1]
[2]
[3]
[4]
[2]
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
20807102347
[1] Module bus cable, 8-pin, color: anthracite gray. The cable is included in the delivery.
[2] System bus cable, 4-pin, color: light gray. The cable is not included in the delivery.
[3] MOVIDRIVE
®
modular
[4] MOVIDRIVE
®
system
Cabling
The connectors of the module bus cable are red and black to simplify correct installa-
tion.
• The black connectors must be plugged into the bus input X30 IN.
• The red connectors must be plugged into the bus output X30 OUT.
Axis systems are interconnected using the system bus cable, see figure above.
24748536/EN – 11/2017