EU Declaration of Conformity
Translation of the original text 900980216/EN
SEW-EURODRIVE GmbH & Co. KG
Ernst-Blickle-Straße 42, D-76646 Bruchsal
declares under sole responsibility that the following products
Bruchsal
a) Authorized representative for issuing this declaration on behalf of the manufacturer
b) Authorized representative for compiling the technical documents
Place Date
17.11.2017
Managing Director Technology
Johann Soder
a) b)
MOVIDRIVE
®
modular MDP power supply module
MDP90A-0100-503-4-000
MDP90A-0100-503-4-C00
MDP90A-0250-503-4-000
MDP90A-0500-503-4-000
MDP90A-0750-503-4-000
in accordance with
Low Voltage Directive 2014/35/EU
(L 96, March 29, 2014, 357-374)
EMC Directive 2014/30/EU 4)
(L 96, March 29, 2014, 79-106)
RoHS Directive 2011/65/EU
(L 174, July 1, 2011, 88-110)
Applied harmonized standards: EN 61800-5-1:2007
EN61800-3:2004/A1:2012
EN 50581:2012
4) According to the EMC Directive, the listed products are not independently operable products. EMC assessment is only possible
after these products have been integrated in an overall system. For the assessment, the product was installed in a typical plant
configuration.
To Next Page
Loading...