SharkRF openSPOT3 - Page 23

DirectIDentry
YoucanconnecttoYSFReflectorserversdirectlyifyouknowthedesiredserver'sID.SelecttheSearch&Direct
option,thenselecttheSearch&Directbutton,thenselecttheIDbutton.EntertheserverIDandthenselectthe
ENTbutton.ServerIDsare5digitlong,makesureyou'veenteredalldigitsotherwisetheradiowon'tletyou
selecttheENTbutton.AlsomakesuretheIDstartswitha#character(notalltransceiversenterthe#beforethe
IDautomatically).
Categories
Youcansaveyourfavoriteserversbyaddingthemtocategories.TheopenSPOT3willautomaticallyswitchtothe
savedserver'sconnectorincaseit'sneeded.
Addingaserver
SelecttheservernameonthemainWires-Xscreen(theoptionatthebottom).Thiswillloadthestation
informationscreen.SelecttheAddbutton,thenselectacategory.
Settingupyourtransceiver
23