Sharp MX-2300 G

MX-2300/2700 N/G ADJUSTMENTS 6 – 12
7-A OPC drum phase adjustment (Auto adjust-
ment)
1) Enter SIM50-22 mode.
2) Press [ALL] key.
(The machine enters the OPC drum phase adjustment mode/
image registration adjustment (auto adjustment) mode, and
both adjustments are executed simultaneously in this mode.)
The OPC drum phase adjustment and the image registration
adjustment can be individually executed by [REGIST] button
and [DRUM POS] button. Since, however, the image registra-
tion adjustment must be executed when the OPC drum phase
adjustment is completed, both adjustment are executed in this
adjustment simultaneously.
3) Press [EXECUTE] key.
The OPC drum phase adjustment and the image registration
adjustment are executed automatically.
* After completion of the adjustment, the drum motor stops and
[EXECUTE] button returns to the normal display and the adjust-
ment result is displayed.
MAIN, SUB: Image regist adjustment value is displayed.
( ) is the difference from the previous adjustment value.
Example: This time 105.0, previous time 103.0: 105.0 (+2)
PHASE: OPC drum phase adjustment value is displayed.
( ) is the previous adjustment value.
Example: This time 90°, previous time 45°:3 (2)
* In case of an error, "ERROR" is displayed with the details.
7-B OPC drum phase adjustment (Manual
adjustment)
1) Enter SIM44-31 mode.
EXECUTE
0
SIMULA TIONġ NO.50-22
TEST
CLOSE
EXECUTE
ġ NOW EXECUTING …
0
SIMULA TIONġ NO.50 -22
TEST
CLOSE
EXECUTE
PRESS [EXECUTE] TO START
ERRORȇTONNER EMPTY
0
SIMULATION NO.50-22
TEST
AUTO ADJUSTMENT OF REGISTRATIONɕDLUM POSITION
EXECUTE
C xxx (xx) xxx (xx) xxx (xx) xxx (xx)
M xxx (xx) xxx (xx) xxx (xx)
Y xxx (xx) xxx (xx) xxx (xx)
1/1
CLOSE
REGIST DRUM POS ALL
Normal end
MAIN R,MAIN F SUB PHASE
Abnormal end
AUTO ADJUSTMENT OF REGISTRATION & DLUM POSITION
AUTO ADJUSTMENT OF REGISTRATION & DLUM POSITION
OK
EXECUTE
EXECUTE
OK
0
A:
Aȇ x
Bȇ x
Ȉġ PRINT MODEȇSETġ VA L U E
Ȉġ COLOR
SIMULA TIONġ NO.44 -31
DRUM POSITION SETTING
x
ġ 1 3
OK
TEST
EXECUTE
CLOSE
Cȇ x Ȉ PAPERSELECT
0
A:ġ
Aȇ x
Bȇ x
Ȉġ PRINT MODEȇSETġ VA L U E
Ȉġ COLOR
SIMULA TIONġ NO.44 -31
DRUM POSITION SETTING
x
1 3 ȯ
TEST
CLOSE
Cȇ x Ȉ PAPERSELECT
EXECUTE
OK
0
A:
Aȇ x
Bȇ x
Ȉ PRINT MODEȇSETġ VA L U E
Ȉ COLOR
SIMULA TIONġ NO.44 -31
DRUM POSITION SETTING
x
1 3
OK
TEST
EXECUTE
CLOSE
Cȇ x Ȉ PAPERSELECT
EXECUTE
EXECUTE
0
A:ġ
Aȇ x
Bȇ x
Ȉ PRINT MODEȇ45Ɏ
Ȉ COLOR
SIMULA TIONġ NO.44 -31
DRUM POSITION SETTING
x
ġ 1 3
TEST
EXECUTE
CLOSE
Cȇ x Ȉ PAPERSELECT
OK
0
A:ġ
Aȇ 1
Bȇ 2
Ȉ PRINT MODEȇ45
Ȉ COLOR
SIMULA TIONġ NO.44 -31
DRUM POSITION SETTING
1
1 3
OK
TEST
EXECUTE
CLOSE
Cȇ 2 Ȉ
10-key
or end of print
10-key
or end of print