123
WASTE Mode
This mode is used to throw away an article which has already been prepared and is no longer serviceable.
[WASTE]
[Item registration]
WASTE mode
[WASTE]
•
PLU entries are only allowed in the WASTE mode, and direct and indirect void operations are also
allowed in this mode.
•
When a WASTE-mode transaction is finalized , the drawer does not open.
•
The consecutive number is incremented every WASTE-mode transaction.
•
When the WASTE mode is activated by touching the [WASTE] key, the mode caption “WASTE” is
displayed.
Key Operation
Print
[WASTE]
[PLU 00002 ]
[PLU 00003 ]
[WASTE]
To Next Page
Loading...
