328
■■
■■
■ Data loading
The programming data can be loaded from the SD card.
(1) Select the [LOADING] menu in the “SD CARD” mode, the selection window “CLEAR & LOAD or LOAD
ONLY” is displayed.
1. CLEAR & LOAD: For data loading with memory clear
2. LOAD ONLY: For only data loading
Select the operation “CLEAR & LOAD or LOAD ONLY”, the following data list window is displayed.
(2) Select the data menu from the list, the confirmation window is displayed.
To load the programming data file, touch the [OK] key.
To cancel the operation, touch the [CANCEL] key.
Text Data list
Select the individual programming data:
DEPARTMENT, PLU/EAN, DYNAMIC EAN, PLU MENU KEY, LINK PLU TABLE,
CONDIMENT TABLE, PLU CONVERT, CRATE TABLE, PROMOTION TABLE,
INDIVIDUAL PROGRAMMING
COMBO MEAL, EAN NON-PLU, PRESS CODE, PLU INFORMATION,
DATA
TRANSACTION, TRAINING TEXT/CLK, CLERK, CASHIER, MANAGER, OTHER
PRESET, DIRECT KEY, FUNCTION MENU, FUNCTION KEY, MESSAGE,
DEVICE CONFIG, TAX, CUSTOMER, VMP ID, DD, ORDERMAN
ALL PROGRAMMING DATA All programming data
CUSTOMER NAME LIST Customer name list
To Next Page
Loading...
