Sharp UP-3500

277
■■
■■
■ Function menu key (FUNCTION KEY
➝
FUNCTION MENU KEY ....... PGM2)
Max. 15 function keys can be programmed to each of 30 function menu keys.
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [FUNCTION KEY] button to display the menu, and touch the [FUNCTION MENU KEY]
button to display the function menu key list.
(3) Select the function menu key from the list, the job selection window “TITLE PRESET/KEY CONTENT
PRESET” is displayed.
TITLE PRESET: To program the title text for each menu key.
KEY CONTENT PRESET: To program function keys for each menu key.
Select the function key position (1 to 15), the function key list is displayed,
and select the function key to assign.
Select the “INHIBIT” to delete the function key from each function menu.
(4) To finish the programming touch the [EXIT] key.
Text Parameter
TITLE PRESET Max. 16 characters
Text Parameter
(Function key 1)
(Function menu key nn) :
(Function key 15)
■■
■■
■ Function key text/color (FUNCTION KEY
➝
FUNCTION KEY ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [FUNCTION KEY] button to display the menu, and touch the [FUNCTION KEY] button to
display the function key list.
(3) Select the function key from the list, the programming window is displayed.
(4) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (4) satisfactorily.
(5) To terminate the programming, touch the [EXIT] key.
Text Parameter
KEY TEXT Description for a dept. key. Up to 16 characters can be displayed.
KEY COLOR 232 colors (Fore color/Back color)