Sharp UP-3500

259
■■
■■
■ Display selection (OPTIONAL
➝
DISPLAY SELECT ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [OPTIONAL] button to display the menu, and touch the [DISPLAY SELECT] button to
program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
RCPT WINDOW EDIT
YES:
NO:
■■
■■
■ EURO (OPTIONAL
➝
EURO ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [OPTIONAL] button to display the menu, and touch the [EURO] button to program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
DATE
Preset the date to execute the automatic EURO modification operation.
Enter the day (2 digits), month (2 digits), and year (2 digits) in this sequence.
TIME
Preset the time of the date to execute the automatic EURO modification operation.
Enter the hour (00-23)
NO: Does not convert the preset unit prices of Dept./PLU/EAN to the ones of EURO
currency in the automatic EURO modification operation.
PRICE CONVERT
YES: Converts the preset unit prices of Dept./PLU/EAN in the automatic EURO
modification operation.
(The preset rate of the [EXCH 1] key is applied as the conversion rate, and the
calculation method is set to “division”)
NON-COMPULSORY: Non-compulsory the automatic EURO modification operation in
the X2/Z2 mode after the preset date.
COMPULSORY: Compulsory the automatic EURO modification operation in the
EURO JOB X2/Z2 mode after the preset date.
(When the EURO STATUS of your POS terminal is already “D” (i.e. the domestic
currency has been changed to EURO in your POS terminal), this programming is
disabled.)