Sharp UP-3500

To Next Page

To Previous Page

288

■■

■ Backup data send programming (BACKUP SEND ....... PGM2)

(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.

(2) Touch the [BACKUP SEND] button to program details.

(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.

Repeat this step (3) satisfactorily.

(4) To terminate the programming, touch the [EXIT] key.

Text Parameter

Select one of the following options (data sources):

SEND DATA ALL RAM:

SSP:

Select one of the following options (data transmission speeds):

PROGRAMMED: Sends data at a programmed speed.

115200bps: Sends data at 115200 bps.

57600bps: Sends data at 57600 bps.

SPEED 38400bps: Sends data at 38400 bps.

19200bps: Sends data at 19200 bps.

9600bps: Sends data at 9600 bps.

4800bps: Sends data at 4800 bps.

2400bps: Sends data at 2400 bps.

■■

■ Backup data receive programming (BACKUP RECEIVE ....... PGM2)