286
■■
■■
■ Customer control programming (CUSTOMER
➝
CUSTOMER PROG. ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [CUSTOMER] button to display the menu, and touch the [CUSTOMER PROG.] button to
program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
Preset a period to delete customer detail data.
PERIOD:MONTH Enter the period in a unit of month. (01 to 99)
If you enter “00”, the customer detail data will not be deleted.
LIMIT CHARGE Limit of charge amount (max. 8 digits: 0 to 99999999)
If the following condition is satisfied, its code is deleted using the deleting operation.
Date of the deleting (Year, Month) ≥ Date of the last access (Year, Month) + programmed period + 1
[Example] Date of the deleting = (1 to 31)/8/2008, Period = 12 months:
Customer Date of the last access
Customer A ((1 to 30)/6/2007)
➝
Deleted
Customer B ((1 to 30)/7/2007)
➝
Deleted
Customer C ((1 to 30)/8/2007)
➝
Kept intact
To Next Page
Loading...
