Sharp UP-3500

294
Drink Dispenser Programming
This function is used to program the drink dispenser data.
■■
■■
■ Drink dispenser preset (DD PRESET ....... PGM2)
(1) Select the PGM2 mode and touch the [DD SETTING] button to display the job menu.
(2) Touch the [DD PRESET] button to program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
VALUE NUMBER First 2 digits value of PLU code: 00 to 99/00
CONNECTION Connection: ON-LINE/OFF-LINE
Transmission data rate (Baud rate)
38400 bps:
19200 bps:
9600 bps:
BAUD RATE 4800 bps:
2400 bps:
1200 bps:
600 bps:
300 bps:
CREDIT MODE ENABLE/DISABLE
DEBIT MODE ENABLE/DISABLE
LENGTH CLK CODE 2/3
PARITY CHECK YES/NO
CREDIT TO CLK YES/NO
■■
■■
■ Drink dispenser operator (DD OPERATOR ....... PGM2)
(1) Select the PGM2 mode and touch the [DD SETTING] button to display the job menu.
(2) Touch the [DD OPERATOR] button to display the clerk code list, and select or enter the clerk code (1 -
9999) and touch the [ENTER] key to program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
GLU START CODE GLU start code: 000 - 999/000
END CODE GLU end code: 000 - 999/000