140
Manager mode
The manager mode is used when managerial decisions must be made concerning POS terminal entries, for
example, for overriding limitations and for other various non-programming managerial tasks.
Normal POS terminal operations may also be performed in this mode.
Entering the Manager Mode
To enter the manager mode, use the following procedure in the REG mode:
XXXX (Secret code)
Manager code (max. 2 digits)
[MGR#]
[ENTER]
Override Entries
Programmed limits (such as maximum amounts) for functions can be overridden by placing the POS
terminal in the manager mode.
8
To Next Page
Loading...
