280
■■
■■
■ Bill printer (DEVICE CONFIG
➝
BILL PRINTER ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [DEVICE CONFIG] button to display the menu, and touch the [BILL PRINTER] button to
program details.
(3) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
[0] : [SELF TERMINAL No.] : This means local device.
TERMINAL# [1-254 (EXCEPT SELF TERMINAL NO.)] : RS232 connection (SHARED DEVICE)
TCP/IP (4th octet of IP address)
CHANNEL#
0: not connect/TCP/IP connection
1-5 : RS232 connection (channel#)
ER-01PU
TM-T90
TM-H6000
PRINTER TM-U295
TM-T88(3)/T88(4)
TM-U200/230
TM-T88(3)(4)+LOGO
INITIAL FEED# Initial line feed for a slip (0 to 64 lines)
SLIP MAX LINE Maximum number of lines printable on a slip (0 to 99)
VP PRINT TIMES Number of times of validation printing (0 to 9)/1
PAPER SHEET
TWO OR MORE: Two or more copy sheet
ONE SHEET: One sheet
To Next Page
Loading...
