Sharp UP-3500

269
■■
■■
■ Department report format (REPORT
➝
DEPT. RPT FORMAT ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [REPORT] button to display the menu, and touch the [DEPT. RPT FORMAT] button to
program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
CUSTOMER COUNTER
SKIP:
NOT SKIP:
■■
■■
■ Hourly report (REPORT
➝
HOURLY REPORT ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [REPORT] button to display the menu, and touch the [HOURLY REPORT] button to program
details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
Memory type;
MEMORY TYPE
15MIN: 15-minute type
30MIN: 30-minute type
60MIN: 60-minute type
START TIME Starting time: max. 2 digits (0 to 23)