Sharp UP-3500

223
■■
■■
■ Direct key (DIRECT KEY ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [DIRECT KEY] button to display the screen list.
(3) Select the corresponding screen, the “SETTING/COPY” selection window is displayed.
To program the key, select the “SETTING”. When the “SETTING” is selected, the keyboard screen is
displayed.
(If you want to copy another keyboard screen, select “COPY” and select the proper screen.)
(4) Touch the desired key position to program.
The “CREATE NEW KEY/EDIT KEY CONTENT/DELETE THIS KEY” menu is displayed. Select the
proper operation from the menu.
• When the “CREATE NEW DIRECT KEY” is selected, the key type window is displayed. Select the key
size (SINGLE/2X2/HORIZONTAL DOUBLE/HORIZONTAL TRIPLE/VERTICAL DOUBLE) and
program the key contents.
• When the “EDIT KEY CONTENT “ is selected, the key contents window is displayed, program the key
contents.
• When the “DELETE THIS KEY” is selected, the required key is deleted.
(5) To finish the programming touch the [EXIT] key.
<Key contents>
Text Parameter
LEVEL1 PLU code (max. 5 digits )
LEVEL 2 PLU code (max. 5 digits )
: :
: :
LEVEL10 PLU code (max. 5 digits )
PLU CODE
Text Parameter
DEPT. CODE Dept. code (max. 2 digits)
DEPT. CODE