Sharp UP-3500 - Drink Dispenser; Orderman; Auto Generate GLU Code

284
■■
■■
■ Drink dispenser (DEVICE CONFIG
➝
DRINK DISPENSER ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [DEVICE CONFIG] button to display the menu, and touch the [DRINK DISPENSER] button
to program details.
(3) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
CHANNEL# 0–5: “0” means no RS-232 channel is assigned.
■■
■■
■ ORDERMAN (DEVICE CONFIG
➝
ORDERMAN ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [DEVICE CONFIG] button to display the menu, and touch the [ORDERMAN] button to
program details.
(3) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
CHANNEL# 0–5: “0” means no RS-232 channel is assigned.
Transmission data rate (Baud rate)
38400 bps:
BAUD RATE 19200 bps:
9600 bps:
4800 bps:
ORDERMAN 1 ID ORDERMAN#1 ID (00000 to 99999)
ORDERMAN 2 ID ORDERMAN#2 ID (00000 to 99999)
ORDERMAN 3 ID ORDERMAN#3 ID (00000 to 99999)
ORDERMAN 4 ID ORDERMAN#4 ID (00000 to 99999)
■■
■■
■ Auto generate GLU code (AUTO GENERATE GLU ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [AUTO GENERATE GLU] button to program details.
(3) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
START CODE Start code: max. 4 digits (0 to 9999)/0001
END CODE End code: max. 4 digits (0 to 9999)/9999