Sharp UP-3500

250
■■
■■
■ Contact-less key (PERSONNEL
➝
CONTACTLESS KEY ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [PERSONNEL] button to display the menu, and touch the [CONTACTLESS KEY] button to
program the contact less key.
(3) Set the contact less key to define, the programming window is displayed to assign a clerk code.
(4) Enter the clerk code to assign.
(5) To terminate the programming, touch the [EXIT] key.
(When the [EXIT] key is touched in the programming window, the confirmation window of the clerk
code/name is displayed.)
When you confirm a clerk code and clerk name for each contact less clerk key, perform the program
reading sequence “CONTACTLESS KEY” in the PGM2 mode.
Text Parameter
CLERK CODE
Clerk code (max. 4 digits: 0001 to 9999)
The entry of “0” disables the use of contact less clerk keys.
■■
■■
■ Prohibition of the contact-less key (PERSONNEL
➝
CLERK KEY DEL. ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [PERSONNEL] button to display the menu, and touch the [CLERK KEY DEL.] button to
delete the contact less key. The programming window is displayed to delete a clerk key.
(3) Enter the clerk code to delete.
The confirmation window is displayed,
to perform the deletion, select “YES”,
to cancel the deletion, select “NO”.
(4) To terminate the programming, touch the [CANCEL] or [EXIT] key.
Text Parameter
CLERK CODE
Clerk code (max. 4 digits: 0001 to 9999)
The entry of “0” disables the use of contact less clerk keys.