221
■■
■■
■ Scale table ( ARTICLE
➝
SCALE TABLE ....... PGM2)
Scale table no.: 1 digit (1 to 9)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [ARTICLE] button to display the menu, and touch the [SCALE TABLE] button to display the
scale table list.
(3) Touch the scale table number button to program the tare weight.
(4) Enter the tare weight and touch the [ENTER] key.
(5) To terminate the programming, touch the [EXIT] key.
When the “DEL” key is touched on table number selection menu, the table is deleted.
Text Parameter
WEIGHT Tare weight : max. 4 digits (0 to 9.999) kg (or 0 to 99.99 lbs)
■■
■■
■ PLU/EAN stock (ARTICLE
➝
PLU/EAN STOCK ....... PGM2 or PGM1)
PLU/EAN stock: max. 7 digits
(1) Select the PGM1 or PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [ARTICLE] button to display the menu, and touch the [PLU/EAN STOCK] button to display
the operation menu (over-write, addition, or subtraction). To create the new stock, select the over-write
operation.
(3) Touch the [OVER WRITE], [ADD], or [SUB] button to program details.
(4) Touch or enter the PLU/EAN code and touch the [ENTER] key to program the stock.
(5) Enter the stock data to over-write/addition/subtraction and touch the [ENTER] key.
(6) To terminate the programming, touch the [EXIT] key.
Text Parameter
CURRENT STOCK Current stock (display only)
NEW STOCK max. 7 digits
OVER WRITE
Text Parameter
CURRENT STOCK Current stock (display only)
ADD max. 7 digits
ADD
Text Parameter
CURRENT STOCK Current stock (display only)
SUB max. 7 digits
SUBTRACT
To Next Page
Loading...
