Sharp UP-3500

236
■■
■■
■ Training text/clerk programming (TRAINING TEXT/CLK ....... PGM2)
You can set the text for the training mode title and up to 2 clerks/cashiers in training.
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [TRAINING TEXT/CLK] button to program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
TEXT
Description for the training mode title
Up to 8 characters can be entered.
CLK/CSR1 CODE Clerk/cashier code in training (max. 4 digits)
CLK/CSR2 CODE Clerk/cashier code in training (max. 4 digits)
■■
■■
■ Orderman media (MEDIA
➝
ORDERMAN MEDIA ....... PGM2)
You can program the media and bill printing status for the orderman media.
Up to 20 orderman media (ORDERMAN.MED 01 through 20) can be programmed.
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [MEDIA] button to display the menu, and touch the [ORDERMAN MEDIA] button to display
the orderman media list (ORDERMAN.MED 01 through ORDERMAN.MED 20).
(3) Select the orderman media to program details.
(4) Touch the required programming item, and select each parameter and touch the [ENTER] key.
Repeat this step (4) satisfactorily.
(5) To terminate the programming, touch the [EXIT] key.
Text Parameter
Selection of the media
MEDIA CASH/CASH2/CASH3/CASH4/CASH5/CHECK/CHECK2/CHECK3/CHECK4/CHECK5/
CREDIT1/CREDIT2/CREDIT3/CREDIT4/ CREDIT5/ CREDIT6/CREDIT7/CREDIT8
Selection of the bill printing status
NO BILL:
GC RCP.:
BILL PRINT BILL:
E.BILL:
C.BILL-GC RCP.:
C.BILL-BILL: