Sharp UP-3500

243
Text Parameter
TEXT max. 12 characters (HOUR GR1 through HOUR GR9)
■■
■■
■ PLU hourly group text (TEXT
➝
PLU HOURLY GROUP ....... PGM2)
You can program a maximum of 12 characters for each PLU hourly group (1 to 9).
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [TEXT] button to display the menu, and touch the [PLU HOURLY GROUP] button to display
the group list.
(3) Touch or select the group and touch the [ENTER] key to program characters.
(4) Enter characters and touch the [OK] key.
(5) To terminate the programming, touch the [EXIT] key.
Text Parameter
PLU INFORMATION nnnn max. 20 characters X 10 lines
■■
■■
■ PLU information text (TEXT
➝
PLU INFORMATION ....... PGM2)
You can program information text in PLU information text tables (1 to 9999). The PLU information text table
consists of 10 lines and up to 20 characters can be entered in each line.
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [TEXT] button to display the menu, and touch the [PLU INFORMATION] button to display the
information table list.
(3) Touch or enter the table number and touch the [ENTER] key to program characters.
(4) Enter characters and touch the [OK] key.
(5) To terminate the programming, touch the [EXIT] key.