Sharp UP-3500 - With;without entries

50
■■
■■
■ With/without entries
This function is used to add/delete tied PLU(s) to/from a Combo PLU/EAN.
The with/without function is used to change the tied PLUs of the combo PLU/EAN in compliance with a
special request made by a guest or to meet other situations.
The following two types are available:
With: This entry adds one of the tied PLUs to combo PLU/EAN.
➝ [WITH] ➝ PLU code ➝ [PLU_EAN] ➝
➝ [WITH] ➝ [Direct PLU key] ➝
Without: This entry deletes one of the tied PLUs from combo PLU/EAN.
➝ [WITHOUT] ➝ PLU code ➝ [PLU_EAN] ➝
➝ [WITHOUT] ➝ [Direct PLU key] ➝
1) Touch the [WITH] or [WITHOUT] key and enter a tied PLU to add/delete.
Repeat this step (1) to modify tied PLUs of the combo PLU/EAN. The “with” and “without” operation is
allowed a total of 20 times.
2) Enter the combo PLU/EAN item.
Key Operation Display
[WITH] [PLU 00008 ]
[WITHOUT] 32 [PLU_EAN]
Combo PLU
➝ [PLU 00011 ]
[CASH_TOTAL]