242
Text Parameter
TEXT max. 12 characters (G ROUP1 through G ROUP9)
■■
■■
■ Department group text (TEXT
➝
DEPT. GROUP ....... PGM2)
You can program a maximum of 12 characters for each department group (1 to 9).
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [TEXT] button to display the menu, and touch the [DEPT. GROUP] button to display the
group list.
(3) Touch or select the group and touch the [ENTER] key to program characters.
(4) Enter characters and touch the [OK] key.
(5) To terminate the programming, touch the [EXIT] key.
Text Parameter
TEXT max. 12 characters (PLU GR00 through PLU GR99)
■■
■■
■ PLU group text (TEXT
➝
PLU GROUP ....... PGM2)
You can program a maximum of 12 characters for each PLU group (0 to 99).
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [TEXT] button to display the menu, and touch the [PLU GROUP] button to display the group
list.
(3) Touch or select the group and touch the [ENTER] key to program characters.
(4) Enter characters and touch the [OK] key.
(5) To terminate the programming, touch the [EXIT] key.
To Next Page
Loading...
