Sharp UP-3500

297
Automatic Sequencing Key Programming
Just one touch of an automatic sequencing key enables you to perform a set of frequently used key
operations that are assigned to the automatic sequencing key. There are a maximum of 99 automatic
sequencing keys available.
You can also assign a maximum of 15 automatic sequencing keys to each of the 6 AUTO menu keys.
Touching an AUTO menu key opens a menu window to select the assigned automatic sequencing keys.
■■
■■
■ Auto menu programming
(1) Select the AUTO KEY mode and touch the [AUTO MENU] button to display the auto menu list (AUTO
MENU1 to AUTO MENU6).
(2) Select the auto menu key from the list, the selection window “TITLE PRESET/KEY CONTENT
PRESET” is displayed.
TITLE PRESET: To program the title text for each auto menu.
KEY CONTENT PRESET: To program auto keys for each auto menu.
Select the auto key position (1 to 15), the auto key list is displayed, and
select the auto key to assign.
Select the “INHIBIT” to delete the auto key from each auto menu.
(3) To finish the programming touch the [EXIT] key.
■■
■■
■ Auto key sequence programming
(1) Select the AUTO KEY mode and touch the [AUTO KEY SEQUENCE] button to display the auto key list
(AUTO to AUTO99).
(2) Select the auto key from the list to program key sequence.
(3) Program the key sequence from DEPT./PLU/FUNC. KEY list.
To delete the step of key sequence, touch the [RECORD DELETE] button.
(4) To finish the programming touch the [EXIT] key.
(5) The confirmation window is displayed. Select the operation from “1.SAVE/2.ABANDON/3.CANCEL”
menu.
Text Parameter
TITLE PRESET Max. 16 characters
Text Parameter
(Auto key 1)
(Auto menu key n) :
(Auto key 15)