48
■■
■■
■ EAN price change function
You can use this function when you need to change the preset price and/or associated department of an
EAN item. The programmed price and/or associated department is changed to the new ones.
There are two methods for change:
1. Price change mode
You can change the preset price and/or the associated department of an EAN item without entering
PGM mode.
2. Changing price during a transaction
When you has found a wrong EAN price and/or associated department upon transaction, you can
correct them at the time of transaction. With the entry of new price and/or associated department, the
preset price and/or associated department is automatically changed to the new price and/or associated
department.
(1) Touch the [PRICE_CHANGE] key, then enter the EAN item (Price Change mode).
Touch the [PRICE_CHANGE] key just after the EAN entry (during the transaction).
The following window is displayed.
If you need to cancel the price change function, touch the [CANCEL] key.
(2) Enter the price and associated department number, then touch the [ENTER] key.
(To keep the current price and department number, touch the [ENTER] key.)
For the Non-PLU type EAN codes having price info. and press codes, the prices in the codes have the
priority over the preset prices. So, for these codes, a changed price is valid only when price change is
executed.
To Next Page
Loading...
