Sharp UP-3500

273
■■
■■
■ Free text (MESSAGE
➝
FREE TEXT ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [MESSAGE] button to display the menu, and touch the [FREE TEXT] button to display the
free text list (TEXT01 to TEXT99).
(3) Touch or select the required free text, and enter the free text and touch the [OK] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [CANCEL] or [EXIT] key.
Text Parameter
(Free text nn) Max. 20 characters (Free text for departments, PLUs/EANs)
■■
■■
■ Validation printing text (MESSAGE
➝
VP TEXT ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [MESSAGE] button to display the menu, and touch the [VP TEXT] button to program details.
(3) Enter the validation printing text and touch the [OK] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [CANCEL] or [EXIT] key.
Text Parameter
(Validation printing text) Max. 30 characters X 3 lines