Sharp UP-3500

233
Text Parameter
TEXT Description for the customer charge key. Up to 12 characters can be entered.
A: Significant digit for HALO (1 through 9)
HALO B: Number of zeros to follow the significant digit for HALO (0 through 8)
AB is the same as A x 10
B
.
BILL PRINT
COMPULSORY: Makes bill printing compulsory.
NON-COMPULSORY: Makes bill printing non-compulsory.
This item decides whether or not your POS terminal should print a message at the foot
FOOTER PRINT
of a receipt when a specified customer charge key is used.
YES: Enables footer printing on the receipt.
NO: Disables footer printing on the receipt.
You can make the non-add code entry compulsory when a customer charge entry is
NON-ADD#
accepted.
COMPULSORY: Compulsory non-add code entry
NON-COMPULSORY: Non-compulsory non-add code entry
DRAWER OPEN
YES: Opens the drawer.
NO: Disables the drawer opening.
VP
COMPULSORY: Compulsory validation printing
NON-COMPULSORY: Non-compulsory validation printing
■■
■■
■ Customer charge key (MEDIA
➝
CUSTOMER CHARGE ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [MEDIA] button to display the menu.
(3) Touch the [CUSTOMER CHARGE] button to program details.
(4) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (4) satisfactorily.
(5) To terminate the programming, touch the [EXIT] key.