Sharp UP-3500

251
Text Parameter
MACHINE NAME Description for the terminal. (max. 16 characters)
MACHINE# Machine number (max. 6 digits: 0 to 999999)
CONSECUTIVE#
Enter a number (max. 4 digits: 0 to 9999) that is one less than the desired starting
number.
BILL NUMBER Enter a number (max. 4 digits: 0 to 9999) that is the desired starting number.
Alarm length of time with drawer opening (0 to 255 seconds)
DRAWER ALARM
Your POS terminal starts to monitor how long the drawer is kept open the moment the
drawer is opened at the end of a transaction in the REG/VOID mode. It stops the time
monitoring when a valid key is touched for the next transaction.
Screen save mode timer (max. 2 digits: 0 to 99 minutes)
SCREEN SAVE If the number “0” is entered, the POS terminal will turn the display off after 100 min., if it
remains idle.
BRIGHTNESS Backlight brightness: max. 3 digits (1 to 255/179)
AUTO SIGN OFF
Auto sign off timer (max. 3 digits: 0 to 999 seconds)
If the number “0” is entered, “auto sign off” function is prohibited.
LICENSE WARNING
License warning day (0 to 99 days)/10
If the number “0” is entered, “license warning” function is prohibited.
SCALE DISPLAY
Scale data display timer (max. 2 digits: 0 to 99 seconds)/1
If the number “0” is entered, “scale display timer” function is prohibited.
Information area color;
INFO. AREA COLOR Select a key color from the colors list 232 Colors
(Fore color/Back color) (BLACK/SILVER/)
■■
■■
■ Terminal programming (TERMINAL ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [TERMINAL] button to program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.