Sharp UP-3500

43
••
••
• Individual type
This function is convenient for matching several PLU/EAN items and selling them in a lump (e.g. value
meal etc.).
Operation is the same as for normal PLU/EAN. The promotion table consists of the text for the table, a
maximum of 25 objected items (selected from PLU/EAN, department or group), trip levels (the number of
entries to be satisfied) for each item, promotion type and promotion detail. The promotion detail depends on
the promotion type.
In the example below, percent discount is used as the promotion type.
The programmed promotion entry will be made under the following condition:
• The quantities of each of the objected items meet the corresponding trip levels programmed in the
promotion table.
Objected items of table no. 2: Item-A (*3.00), Item-B (*2.50), Item-C (*2.10)
Trip levels for each item: Item-A (1), Item-B (1), Item-C (2)
Promotion type: Percent discount
Promotion detail: Percent rate (40.00%)
<Sale 1> <Sale 2>
Item-A *3.00 Item-A *3.00
Item-B *2.50 Item-A *3.00
Item-C *2.10 Item-B *2.50
Item-C *2.10 Item-C *2.10
Subtotal *9.70 Subtotal *10.60
Discount -3.88 Discount -0.00 ← Discount is not allowed
Total *5.82 Total *10.60
(Q’ty of the item-C should be two.)
In the case of <Sale 1> above
Key Operation Display
Treated as *3.00 item
➝
[PLU 00040 ]
Treated as *2.50 item
➝
[PLU 00041 ]
Treated as *2.10 item
➝
[PLU 00042 ]
Treated as *2.10 item
➝
[PLU 00042 ]
[CASH_TOTAL]