Sharp UP-3500 - Page 81

79
••
••
• Bill transfer
This function is used to change the GLU code of a particular bill.
[B.T.]
#1
[OPENED_GLU]
(Select the GLU code ( ))
[CANCEL]
(Touch the GLU code)
(Enter the GLU code)
[ENTER]
[ENTER]
(Enter the GLU code)
[GLU]
[NBAL]
#2
(Enter the new GLU code)
[GLU]
• This function requires that the current GLU code be entered for #1 and a new GLU code be entered for
#2.
• A #1 bill is transferred to a #2 bill. The #1 bill is then cleared and set free.
Key Operation Display
1001 [GLU]
[B.T.]
1010 [GLU]
[NBAL]