1 About this document
1.1 Scope
NOTE
These operating instructions apply to the AFS60/AFM60 EtherNet/IP absolute encoder
with the following type designations:
•
Singleturn encoder = AFS60A-xxIx262144
•
Multiturn encoder = AFM60A-xxIx018x12
1.2 Purpose of this document
These operating instructions instruct the technical personnel of the machine manufac‐
turer or machine operator in:
•
Electrical installation
•
Commissioning
•
Parameterization
•
Operation
•
Maintenance
These operating instructions must be made available to all persons who work with the
encoder.
The official and legal regulations for operating the encoder must always be complied
with.
1.3 Target group
These operating instructions are intended for planning engineers, developers, and oper‐
ators of plants and systems into which one or more AFS/AFM60 EtherNet/IP Absolute
encoder are to be integrated. They are also intended for people who put the encoder
into operation for the first time or who are in charge of maintenance.
These instructions are written for trained persons who are responsible for the installa‐
tion, mounting and operation of the encoder in an industrial environment.
Only trained electricians are permitted to carry out work on the electrical system or
electrical assemblies.
NOTICE
b
Read the operating instructions carefully and ensure that you have understood the
contents completely before you work with the encoder.
1.4 Further information
These operating instructions do not contain any information on mounting, technical
data and dimensional drawings. These are enclosed separately with the device or
available via the Internet: www.sick.com
The following information is available via the Internet:
•
Mounting instructions
•
Data sheets
•
CAD data for drawings and dimensional drawings
•
Certificates (such as the EU declaration of conformity)
1 ABOUT THIS DOCUMENT
6
O P E R A T I N G I N S T R U C T I O N S | AFS/AFM60 EtherNet/IP 8014213/1EF3/2021-12-08 | SICK
Subject to change without notice
To Next Page
Loading...
Need help?
General
