SICK EtherNet/IP AFS60 - Page 65

Under Controller Tags, the parameters of the encoder can be changed in the Sick‐
AFxWS_Enc1_SetData node.
Figure 53: Changing parameters under SetData
Parameters that are changed in the controller are displayed in the web server on the
Parameterization page.
NOTE
The web browser must be updated to display the changed data.
CONFIGURATION USING A PLC 5
8014213/1EF3/2021-12-08 | SICK O P E R A T I N G I N S T R U C T I O N S | AFS/AFM60 EtherNet/IP
65
Subject to change without notice