Figure 51: Reading out the parameters under GetData
The parameters changed in the web server are displayed in the controller.
Figure 52: Example of changing data in the web server and reading out the parameters in the
controller
NOTE
If a parameter is changed via the web server, bit 15 in the Fault header is automatically
set as a warning (see table 33, page 108).
5 CONFIGURATION USING A PLC
64
O P E R A T I N G I N S T R U C T I O N S | AFS/AFM60 EtherNet/IP 8014213/1EF3/2021-12-08 | SICK
Subject to change without notice
To Next Page
