Figure 87: Definition of variable PRESET_Value
6. In the New Tag dialog, enter PRESET_Value in the Name field, select the DINT data
type in the Data Type field and click on OK.
Finally, a variable must be defined and declared that obtains the preset value from
the controller.
7. Select New Tag again.
CONFIGURATION USING A PLC
5
8014213/1EF3/2021-12-08 | SICK O P E R A T I N G I N S T R U C T I O N S | AFS/AFM60 EtherNet/IP
85
Subject to change without notice
To Next Page
Loading...
