Manufacturers
D.1.4 USB>RS232/485 Converter 050201
The USB>RS232/485 Converter can be ordered at SIEB & MEYER as an optional ac-
cessory for device configuration. This converter is developed especially for the amplifier
series SD2x. Via the converter the devices can communicate with a PC without RS232
or RS485 interface.
A short USB cable is supplied with the converter. The connection cable to the drive am-
plifiers must be ordered additionally or built by yourself with suitable length.
SIEB & MEYER article number Description
050201 USB>RS232/485 converter
K362101xxxR01 (xxx = cable
length in dm)
RS485 device connection cable to the converter 050201
For further information, refer to the document “050201 – USB>RS232/485 Converter”.
192 Drive System SD2 - Hardware Description
To Next Page
Loading...