8.2 Device Variant 0362131xxy (max. 60 A) with
Integrated Heat Sink
Fig. 57: Device view 0362131xxy
Fig. 57: Device view 0362131xxy
NOTICE
Restriction of cooling air flow
If the air flow cooling the device is obstructed, the device could overheat and possibly
become damaged.
→ When installing the device, pay attention to the direction of air flow through the in-
ternally installed fan [arrows].
→ For sufficient cooling the ventilation inlets and outlets must be kept free by a space
of min. 10 cm.
The device is designed for vertical wall mounting. Other setup positions are possible but
you must consult SIEB & MEYER before.
79Drive System SD2 - Hardware Description
Compact Devices
To Next Page
Loading...
Need help?
General
