6.2 Device Variant 0362111MF/0362111NF
(max. 200 A)
Fig. 7: Device view 0362111MF/0362111NF
Fig. 7: Device view 0362111MF/0362111NF
NOTICE
Restriction of cooling air flow
If the air flow cooling the device is obstructed, the device could overheat and possibly
become damaged.
→ When installing the device, pay attention to the direction of air flow generated by
natural convection [arrows].
→ For sufficient cooling the ventilation inlets and outlets must be kept free by a space
of min. 10 cm.
The device is designed for vertical wall mounting. Other setup positions are possible but
you must consult SIEB & MEYER before.
29Drive System SD2 - Hardware Description
Single-axis Drive Amplifiers
To Next Page
Loading...
Need help?
General
