864-5091.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • Revision 06 127/214
Installation
28.7 Capacitive voltage tap at the busbar
The capacitive voltage tap at the panel connection housing is pre-assembled at the factory.
Fig. 141: Overview of busbar component: Capacitive voltage tap
①
Dummy plug
②
Capacitive voltage tap
③
Panel connection housing
④
Busbars
⑤
Busbar housing
NOTE
Visual inspection of the dummy plugs
➭ Verify that all dummy plugs (
① ) are properly inserted in the capacitive voltage taps.
To Next Page
Loading...
