Installation
120/214 Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9
28.4 Gas-insulated bar
Gas-insulated bar with three-position disconnector
➭ Remove the covers ① . To do this, remove the 8 bolts M8 x 20 and the nuts.
Reuse the bolts for fixing the gas-insulated bar.
Fig. 133: Removing the covers ①
Fig. 132: Overview of busbar component: Gas-insulated bar
with three-position disconnector
①
Gas-insulated bar with integrated pressure ring
②
Connection housing for gas-insulated bar
③
Busbars
④
Busbar housing
To Next Page
Loading...
