864-5091.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • Revision 06 61/214
Installation
Regenerating the
seaworthy packing
After 6 months (12 months with seaworthy long-time packing) of storage, the protection of
the seaworthy packing is exhausted. If the transport units still need to be stored outdoors,
the seaworthy packing must be regenerated.
➭ If there is no sufficient knowledge about professional regeneration of the packing:
Ask for expert personnel via the competent Siemens representative.
➭ Open the packings.
➭ Renew desiccant bags.
➭ Refit the packings so as to reach full protection: Weld the PE protective foils hermetically
tight and rebuild the seaworthy crates completely.
20.3 Tools/auxiliary means
Before starting to work on the switchgear, provide for the tools/auxiliary means required:
• Vacuum pump (e.g. DILO type B048R01), DN8 connection
• Portable hygrometer (e.g. DILO type 3-037-R001 or DILO type 3-038 SF
6
multimeter),
DN8 connection
• Volume percentage meter (e.g. DILO type 3-027-R002 or DILO type 3-038 SF
6
multimeter),
DN8 connection
• Gas leak detector (e.g. DILO type 3-033-R002)
•SF
6
gas filling device (e.g. DILO type 3-393-R001), DN8 connection
• Vacuum cleaner with flexible and thin tube
• 1 set roller pads
• Round-steel bars; diameter: 30 mm, length: 1600 mm for double panel + 600 mm for each
additional panel
• Chain with transport shackles
• Roller crowbars
• Reinforcing bars
• Racks (crank winch)
• Hydraulic jack (2 to 3 t, for vertical and horizontal stroke)
• Emery paper (K 360)
•Step-ladder
• Cable drum
•Drill
• Torque wrench 8 – 20 Nm, 20 to 70 Nm
• Shim plates 0.5 to 1 mm
• Cleaning agent HAKU 1025/90
• Soft, lint-free cloths
• Torx reversing ratchet / screwdriver T10/80, T20/100, T25/100, T30/115
• Water level
•Guide string
• Rod magnet with flexible shaft
• Open spanners SW 13, 16, 17, 18, 19, 24, 27, 32 , 36
• Ring spanners SW 13, 16, 17, 18, 19, 22, 24, 27
• Various screwdrivers
• Vernier caliper
• Water pump pliers
• Mirror with flexible shaft (welding mirror)
To Next Page
Loading...
