Installation
116/214 Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9
28.3 Solid-insulated bar (V-type bar)
Solid-insulated bar with three-position disconnector
➭ Remove the covers ① and sealing rings. To do this, remove the 6 bolts M8 x 45
(including washer and spring washer) and the M10 nuts.
Fig. 125: Removing the covers ① and sealing rings
Fig. 124: Overview of busbar component: Solid-insulated bar
with three-position disconnector
①
Solid-insulated bar with integrated pressure ring
②
Connection housing for solid-insulated bar
③
Busbar housing
④
Busbars
To Next Page
Loading...
