864-5091.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • Revision 06 49/214
Description
18.9 Overview of busbar covers
ATTENTION
If covers are removed from the switchgear assembly, please ensure that the correct cover type
is mounted again.
➭ If necessary, mark cover type.
NOTE
Mounting direction of post insulator cover
➭ The post insulator cover is marked with the designation "Front". The marking must always
point towards the front of the switchgear when the cover is mounted.
➭ Observe the mounting position of the post insulator cover.
Fig. 29: Standard cover
(rear view)
Fig. 30: Desiccant cover
(rear view)
Fig. 31: Post insulator cover
(rear view)
Fig. 32: Post insulator cover with desiccant
(rear view)
Fig. 33: Bursting disc
(rear view)
Fig. 34: Bursting disc
(front view)
To Next Page
Loading...
