EasyManua.ls Logo

Siemens 8DB10 - Cleaning agents and cleaning aids

Siemens 8DB10
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Servicing
206/214 Revision 06 INSTALLATION AND OPERATING INSTRUCTIONS 8DB10 864-5091.9
Permissible lubricants:
Renew the anti-corrosion protection greasing.
Operate the circuit-breaker several times mechanically by hand for test.
44.6 Cleaning agents and cleaning aids
For bearings, sliding surfaces:
Isoflex Topas L 32
Klüber - Lubrication KG
Geisenhauer Str. 7
Postfach 70 10 47
D-81310 München
For bearings that are inaccessible for
grease, and bearings of the auxiliary
switch S1:
Tellus Oil 32
Shell Direct GmbH
Suhrenkamp 71
D-22335 Hamburg
ATTENTION
Parts of the switchgear that cannot be dismantled may be damaged if they come into contact
with cleaning agents.
➭Do not wash joints and bearings which cannot be dismantled with a cleaning agent.
DANGER
For protection of personnel and environment:
Read the instructions for use of cleaning agents carefully.
Observe the warnings (e.g. inflammable!, corrosive!, etc.)
Cleaning agents HAKU 1025-920 Contains carbon hydrogen!
Household cleaner For cleaning electrostatically stressed insulation (e.g. epoxy
resin)
Cleaning aids Lint-free cleaning paper For applying and cleaning liquid cleaning agent (single use)
Brush
Cleaning rag
Vacuum cleaner

Table of Contents

Related product manuals