Installation
136/214 Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9
➭ Mount the retainers for the rear walls. To do this, use 24 bolts M6 x 12.
Tightening torque: 12 Nm.
Fig. 149: Bolting points for the retainers
①
Fixing cross members
②
Subframe
Fig. 150: Retainers for the rear walls
① , ②
Retainer for
intermediate panels
③
Retainer for left end panels (retainer for
right end panels is not shown here)
To Next Page
Loading...
