Communications configuring
3-200 System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2003
After the file has been opened, it can be edited in the "LAD/STL/CSF"
program. There it can be compiled via "File / Compile".
The procedure is shown in the following diagram:
Fig. 3-84 Compiling the source file in the "LAD/STL/CSF" application
After the file has been successfully compiled, a new DB is available in the
configured software. The name of the DB corresponds to the name
specified in the header line of the file.
To Next Page
Loading...
