Siemens FC300 - Page 103

4-13 Configure Configure the process values (unit, low flow cut-off, limits, and hys‐
teresis)
14-17 Totalizer Configure totalizers (if activated in operating view, it is possible to
reset totalizer without password access)
Inputs/Outputs wizard (menu item 1.4)
The Input/Output wizard will guide you through setup of inputs and outputs on channels 1 to
4. The availability of channels 2 to 4 depends on the product configuration.

)&


&XUUHQW2XWSXW
6HOHFW&KDQQHO
6LJQDO2XWSXW
6LJQDO2XWSXW
6LJQDO,QSXW
3URFHHG
5HOD\2XWSXW
6LJQDO,QSXW
7KH,QSXW2XWSXWZL]DUGLVQRZILQLVKHG
5HOD\2XWSXW
6LJQDO2XWSXW
View
no.
View text Options/Description
2 Select Channel Select the channel to be configured
3-14 Configuration Configure selected channel (*: see appropriate graphic for configu‐
ration of the input/output function)
Channels 3 and 4 can only be assigned to one function (signal output, relay output or signal
input).
Current output - channel 1
The Current Output on Channel 1 is a 4 to 20 mA output with Profibus, Profinet, HART, Modbus,
X-bus communication. Channel 1 can be used in Functional Safety applications if ordered with
SIL option.
Commissioning
6.3 Local commissioning
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 103