B.9 Maintenance and diagnostics
Table B-30 Identification
HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.1.1 Long TAG Enter a unique TAG name for
the device (up to 32 characters).
User
3.1.2 Descriptor Enter a unique description for
the measurement point (up to 16
characters).
User
3.1.3 Message Enter message (up to 32 char‐
acters).
User
3.1.4 Location Enter device location (up to 32
characters).
User
3.1.5 Installation date Enter the installation date of the
device.
2012-01-01
00:00
User
3.1.6 Manufacturer Device manufacturer Siemens Read
only
3.1.7 Product name Also shown on the device name‐
plate.
SITRANS F Read
only
3.1.8 Version Product version. Also shown on
the device nameplate.
Read
only
3.1.9 Order number Product order number (MLFB).
Also shown on the nameplate.
Read
only
3.1.10 Serial number Unique transmitter serial num‐
ber. Also shown on the device
nameplate.
Read
only
3.1.11 FW version System firmware version. Read
only
3.1.12 HW version System hardware version. Read
only
3.1.13 Final assembly number Materials and components used
in the final assembly.
Read
only
Table B-31 Transmitter electronics
HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.1.15.1 HW version Transmitter hardware version. Read
only
3.1.15.2 FW version Transmitter firmware version. Read
only
3.1.15.3 Serial number Unique transmitter serial num‐
ber. Also shown on the device
nameplate.
Read
only
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
422 Operating Instructions, 06/2017, A5E39789040-AA
To Next Page
Loading...
